Specific precautions for laser marking machine

1. The laser marking machine should be used in a dust-free, 10℃~35℃ environment as much as possible, keeping the optical components dry and dust-free. Usually, it is necessary to ensure a separate enclosed workspace, maintain a constant temperature indoors, have floor paint or tiles, and install air conditioning.
2. The customer must provide a main power supply that supports at least 2500W AC single-phase power, and the main power cord of the equipment provided by our company must be installed on an air switch for protection. The use of triangular plugs is strictly prohibited.
3. The main power supply provided by the customer must have a ground wire and virtual connection is strictly prohibited.
4. It is best to use deionized water for cooling in the circulating water tank. If deionized water is not available, distilled water can be used as a substitute; After using the circulating cooling water for a period of time, it should be replaced in a timely manner (it is recommended to change the water at least once every two weeks) to avoid affecting the laser efficiency.